ZCSC switch equipment status on-line monitoring system
  • ZCSC switch equipment status on-line monitoring system

ZCSC switch equipment status on-line monitoring system

ZCSC switching equipment status online monitoring system, effectively solve the traditional regular maintenance of equipment, blind disassembly, waste a lot of manpower, material and financial problems, but also reduce power loss and improve the life of a complete set of equipment itself. Primary equipment online monitoring based on intelligent sensors, through the analysis of the field physical layer sensor collected equipment mechanical characteristics, electrical characteristics, insulation characteristics and other state data

ZCSC switching equipment status online monitoring system, effectively solve the traditional regular maintenance of equipment, blind disassembly, waste a lot of manpower, material and financial problems, but also reduce power loss and improve the life of a complete set of equipment itself. The online monitoring of primary equipment based on intelligent sensors provides equipment health status discrimination, fault prediction and optimal solution, as well as equipment life prediction, by analyzing various state data of equipment mechanical characteristics, conductive characteristics and insulation characteristics collected by on-site physical layer sensors, and provides data support for product improvement of primary equipment.



Main function of the system


(1) Monitoring function:


Mechanical characteristics monitoring of circuit breakers


Operation current monitoring of opening and closing coils


Bus and contact temperature monitoring *


Release monitoring *


Air tank temperature and humidity, pressure monitoring *



(2) Measurement and control function:


Remote message, telemetry to send


Mechanical characteristics curve up


Fixed value, soft plate modification


Note: * indicates that this function is optional


(QR code of the product, scan the code link to the official website product page, check the product introduction, functional features and standard technical parameters)



System characteristics


Monitoring module and primary equipment to achieve a secondary integration design;


Multi-dimensional sensor unit integrated design, high integration, easy installation;


Innovative structure design, in order to ensure that the original performance of the equipment does not change to achieve the replacement of the module;


Can realize a device in situ status assessment.


The integrated solution can meet the requirements of life cycle management and operation and maintenance data of complete sets of switching equipment of 35kV and below, and provide data and strategy support for the big data of equipment operation and maintenance.


Wire system design, can access the sensor data of multiple devices at the same time, to form a network, cost-effective.


Maintenance-free design, the core unit has a perfect self-check function, when found abnormal alarm;


Supports various communication protocols such as IEC60870-5-101, IEC60870-5-103, and IEC60870-5-104, and can exchange data independently with cloud platforms.


Support fault recording function;


Supports maintenance mode without power failure.



ZCSC switching equipment status online monitoring system, effectively solve the traditional regular maintenance of equipment, blind disassembly, waste a lot of manpower, material and financial problems, but also reduce power loss and improve the life of a complete set of equipment itself. The online monitoring of primary equipment based on intelligent sensors provides equipment health status discrimination, fault prediction and optimal solution, as well as equipment life prediction, by analyzing various state data of equipment mechanical characteristics, conductive characteristics and insulation characteristics collected by on-site physical layer sensors, and provides data support for product improvement of primary equipment.



Main function of the system


(1) Monitoring function:


Mechanical characteristics monitoring of circuit breakers


Operation current monitoring of opening and closing coils


Bus and contact temperature monitoring *


Release monitoring *


Air tank temperature and humidity, pressure monitoring *



(2) Measurement and control function:


Remote message, telemetry to send


Mechanical characteristics curve up


Fixed value, soft plate modification


Note: * indicates that this function is optional


(QR code of the product, scan the code link to the official website product page, check the product introduction, functional features and standard technical parameters)



System characteristics


Monitoring module and primary equipment to achieve a secondary integration design;


Multi-dimensional sensor unit integrated design, high integration, easy installation;


Innovative structure design, in order to ensure that the original performance of the equipment does not change to achieve the replacement of the module;


Can realize a device in situ status assessment.


The integrated solution can meet the requirements of life cycle management and operation and maintenance data of complete sets of switching equipment of 35kV and below, and provide data and strategy support for the big data of equipment operation and maintenance.


Wire system design, can access the sensor data of multiple devices at the same time, to form a network, cost-effective.


Maintenance-free design, the core unit has a perfect self-check function, when found abnormal alarm;


Supports various communication protocols such as IEC60870-5-101, IEC60870-5-103, and IEC60870-5-104, and can exchange data independently with cloud platforms.


Support fault recording function;


Supports maintenance mode without power failure.